مقاله انگلیسی رایگان در مورد جریان آب در سیستم های خنک کننده نیروگاه – الزویر ۲۰۱۸

مقاله انگلیسی رایگان در مورد جریان آب در سیستم های خنک کننده نیروگاه – الزویر ۲۰۱۸

 

مشخصات مقاله
انتشار مقاله سال ۲۰۱۸
تعداد صفحات مقاله انگلیسی ۱۹ صفحه
هزینه دانلود مقاله انگلیسی رایگان میباشد.
منتشر شده در نشریه الزویر
نوع نگارش مقاله مقاله پژوهشی (Research article)
نوع مقاله ISI
عنوان انگلیسی مقاله Numerical study of water flow rates in power plant cooling systems
ترجمه عنوان مقاله بررسی عددی جریان آب در سیستم های خنک کننده نیروگاه
فرمت مقاله انگلیسی  PDF
رشته های مرتبط مهندسی مکانیک
گرایش های مرتبط تاسیسات حرارتی و برودتی، مهندسی مکانیک نیروگاه
مجله پیشرفت مهندسی و علوم حرارتی – Thermal Science and Engineering Progress
دانشگاه Wrocław University of Science and Technology – Poland
کلمات کلیدی سیستم خنک کننده، نیروگاه، مدل سازی ریاضی، مدیریت آب
کلمات کلیدی انگلیسی cooling system, power plant, mathematical modeling, water management
شناسه دیجیتال – doi
https://doi.org/10.1016/j.tsep.2018.04.015
کد محصول E8531
وضعیت ترجمه مقاله  ترجمه آماده این مقاله موجود نمیباشد. میتوانید از طریق دکمه پایین سفارش دهید.
دانلود رایگان مقاله دانلود رایگان مقاله انگلیسی
سفارش ترجمه این مقاله سفارش ترجمه این مقاله

 

بخشی از متن مقاله:
۱٫ Introduction

In all types of power plants, cooling installations play a significant role in the electricity production process. They are utilized to remove waste heat (e.g. a cooling system including condensers and cooling towers) or protect a boiler’s auxiliary equipment against overheating. Regardless of the intended use, the cooling installation can always be divided into two parts: a series-parallel system (consisting of pipelines and pumps) which transports the cooling medium and heat exchangers responsible for heat transfer processes. Hydraulic systems with cooling water are designed according to optimization criteria in order to achieve maximum flow rates for the nominal thermal output of the power unit if it is operating under standard thermodynamic conditions (Malek 2007). However, a gradual decrease of the overall efficiency of coal-fired power plants with time is observed (Campbell 2013). Among others, working parameters of hydraulic installations are subject to deterioration due to, for example, reconstruction of the system, deterioration of the circulating pumps’ characteristics or deposition of mineral sediments inside pipelines. The above-mentioned changes cause a gradual decrease in flow rates in the cooling systems which cannot then achieve their design flow parameters. This situation is reflected in lower heat fluxes achieved in the heat exchangers (e.g. condensers, ash coolers) or higher outlet temperatures of the cooling medium. These negative changes also have an influence on the increase in the combustion of fossil fuels, which leads to an increase of the emission of greenhouse gases (GHG) and other pollutants to the atmosphere (Blog 2016). In order to stop (or at least slow down) this trend, Ryabchikov et al. suggested a number of specific actions, among which the retrofit of cooling water installations is one of the most important (Ryabchikov 2012). Nichols et al. estimated that the modernization of cooling system performance in American power plants could lead to an improvement in the overall efficiency of the unit by about 0.2  ۱٫۰% (Nichols 2008). Similar estimations, made for APEC countries, indicate that the improvement of feed water heaters and condensers could enhance the overall power unit efficiency by a value of approximately 0.8% (Boncimino 2005).

ثبت دیدگاه