مقاله انگلیسی رایگان در مورد توصیف خصوصیات کامپوزیت های آلیاژ آلومینیوم SiCp/2024 – الزویر ۱۹۹۹

مقاله انگلیسی رایگان در مورد توصیف خصوصیات کامپوزیت های آلیاژ آلومینیوم SiCp/2024 – الزویر ۱۹۹۹

 

مشخصات مقاله
ترجمه عنوان مقاله توصیف خصوصیات کامپوزیت های آلیاژ آلومینیوم SiCp/2024 تهیه شده با روش پردازش مکانیکی در آسیاب گلوله ای کم انرژی
عنوان انگلیسی مقاله Characterization of SiCp/2024 aluminum alloy composites prepared by mechanical processing in a low energy ball mill
انتشار مقاله سال ۱۹۹۹
تعداد صفحات مقاله انگلیسی  ۷ صفحه
هزینه دانلود مقاله انگلیسی رایگان میباشد.
پایگاه داده نشریه الزویر
نوع نگارش مقاله
مقاله پژوهشی (Research article)
مقاله بیس این مقاله بیس نمیباشد
نمایه (index) scopus – master journals – JCR
نوع مقاله ISI
فرمت مقاله انگلیسی  PDF
ایمپکت فاکتور(IF)
۳٫۴۱۴ در سال ۲۰۱۷
شاخص H_index ۱۹۲ در سال ۲۰۱۸
شاخص SJR ۱٫۶۹۴ در سال ۲۰۱۸
رشته های مرتبط مهندسی مواد و متالوژی
گرایش های مرتبط شکل دادن فلزات
نوع ارائه مقاله
ژورنال
مجله / کنفرانس علوم و مهندسی مواد: A
Materials Science and Engineering: A
دانشگاه Department of Mining and Metallurgy, Université Laval, Québec G1K 7P4, Canada
کلمات کلیدی  آسیاب گلوله ای کم انرژی، پارامترهای پردازش بهینه، مقاومت تسلیم
کلمات کلیدی انگلیسی Low energy ball milling, Optimized processing parameters, Yield strength
شناسه دیجیتال – doi
https://doi.org/10.1016/S0921-5093(98)01030-2
کد محصول E11628
وضعیت ترجمه مقاله  ترجمه آماده این مقاله موجود نمیباشد. میتوانید از طریق دکمه پایین سفارش دهید.
دانلود رایگان مقاله دانلود رایگان مقاله انگلیسی
سفارش ترجمه این مقاله سفارش ترجمه این مقاله

 

فهرست مطالب مقاله:
Outline
Abstract
Keywords
۱٫ Introduction
۲٫ Experimental procedure
۳٫ Results and discussion
۴٫ Conclusions
References

بخشی از متن مقاله:

Abstract

In the present work, SiCp/2024 composite powders were produced by low energy ball milling a mixture of centrifugally atomized 2024 particles and β-SiC reinforcements having a size range between 2 and 6 μm. The experimental parameters studied were the milling time (between 1 and 24 h) and the volume proportion of β-SiC in the starting powder mixture (between 5 and 35%). These SiCp/2024 composite powders were consolidated by hot extrusion using optimized processing parameters. The microstructure of the extruded composites showed a uniform distribution of β-SiC particles in the 2024 aluminum matrix. Moreover, the mechanical properties (yield strength and Young’s modulus) improved with the SiC content although some reduction in ductility was observed.

Introduction

For more than two decades, aluminum-matrix composites have been made by different methods including casting [1–۹], spray atomization and codeposition [9,10], pressure-infiltration of porous ceramic preforms [11], and powder metallurgy techniques like densification of mixtures of metal and ceramic powders [12–۱۷], or of composite powders made by mechanical processing [13,18–۳۴]. The mechanical properties of these composites are influenced significantly by the quantity and mode of distribution of the reinforcements and also by the nature of the interfaces between the reinforcements and the matrix.

ثبت دیدگاه