مقاله انگلیسی رایگان در مورد پیش بینی نیروی کوبشی ستون های لوله ای پر شده از بتن – الزویر ۲۰۱۱

مقاله انگلیسی رایگان در مورد پیش بینی نیروی کوبشی ستون های لوله ای پر شده از بتن – الزویر ۲۰۱۱

 

مشخصات مقاله
ترجمه عنوان مقاله پیش بینی نیروی کوبشی ستون های لوله ای پر شده از بتن، همراه با کمانش موضعی
عنوان انگلیسی مقاله Prediction of the squash loads of concrete-filled tubular section columns with local buckling
انتشار مقاله سال ۲۰۱۱
تعداد صفحات مقاله انگلیسی  ۹ صفحه
هزینه دانلود مقاله انگلیسی رایگان میباشد.
پایگاه داده نشریه الزویر
نوع نگارش مقاله
مقاله پژوهشی (Research article)
مقاله بیس این مقاله بیس نمیباشد
نمایه (index) scopus – master journals – JCR
نوع مقاله ISI
فرمت مقاله انگلیسی  PDF
ایمپکت فاکتور(IF)
۲٫۸۸۱ در سال ۲۰۱۷
شاخص H_index ۶۶ در سال ۲۰۱۸
شاخص SJR ۱٫۶۷۲ در سال ۲۰۱۸
رشته های مرتبط مهندسی عمران
گرایش های مرتبط  سازه
نوع ارائه مقاله
ژورنال
مجله / کنفرانس سازه های نازک و پیچیده – Thin-Walled Structures
دانشگاه Department of Civil Engineering, Yeungnam University, Gyongsan 712-749, Republic of Korea
کلمات کلیدی سطح مقطع فولادی توخالی دایره ای (CHS ، سطح مقطع لوله ای پر شده از بتن (CFT) ، بار کوبشی، مقاومت نهایی، تست های فشردگی، نسبت قطر به ضخامت، نسبت عرض به ضخامت، روش مستقیم محاسبه ی مقاومت
کلمات کلیدی انگلیسی Circular hollow steel (CHS) sections, Concrete-filled tubular (CFT) sections, Squash load, Ultimate strength, Compression tests, Diameter to thickness ratio, Width to thickness ratio, Direct strength method
شناسه دیجیتال – doi
https://doi.org/10.1016/j.tws.2010.08.009
کد محصول E11669
وضعیت ترجمه مقاله  ترجمه آماده این مقاله موجود نمیباشد. میتوانید از طریق دکمه پایین سفارش دهید.
دانلود رایگان مقاله دانلود رایگان مقاله انگلیسی
سفارش ترجمه این مقاله سفارش ترجمه این مقاله

 

فهرست مطالب مقاله:
Outline
Abstract
Keywords
۱٫ Introduction
۲٫ Material and section properties
۳٫ Column tests
۴٫ Ultimate strengths of concrete-filled tubular section columns
۵٫ Conclusions
Acknowledgement
References

بخشی از متن مقاله:
Abstract

This paper describes a series of compression tests of circular hollow steel (CHS) sections and circular concrete-filled tubular (CFT) sections. The diameter to thickness ratios of the test specimens ranged 45–۱۴۰٫ This range was set to investigate the effect of local buckling in the circular steel skin on the ultimate strength of CFT columns. The confining effect against filled-in concrete was also studied. A squash load formula for CFT stub columns is proposed to account for the post-local-buckling strength of steel skin. The ultimate strength of steel skin was predicted by a kind of Direct Strength Method (DSM). The proposed DSM does not require the computation of the effective area of the steel skin, but uses the gross area of the steel skin and the design strength formula based on various test results. The compressive strength formula of the filled-in concrete accounting for the strength ratio of steel skin to filled-in concrete is also proposed to consider the increase in compressive strength of the filled-in concrete, due to the confining effect of the steel skin. The design strengths of CFT columns were compared with the test results for verification.

Introduction

The attractive way to solve the local instability and the low ductility of thin hollow steel tubes is filling them with concrete. The concrete-filled tubular (CFT) composite sections are being widely used as columns of high-rise buildings and bridge piers in recent years. Since the steel skin confines the filled-in concrete tri-axially and the concrete resists against the inward deformation of steel skin, both steel and concrete contribute to the strength enhancement of the CFT column.

ثبت دیدگاه