مقاله انگلیسی رایگان در مورد مسیریابی قابل پیکربندی مجدد با قابلیت تحمل خطا برای شبکه های درون تراشه ای – الزویر 2016

Abstract

This paper presents a reconfigurable fault tolerant routing for Networks-on-Chip organized into hierarchical units. In case of link faults or failure of switches, the proposed approach enables the online adaptation of routing locally within each unit while deadlock freedom is globally ensured in the network. Experimental results of our approach for a 16 × 16 network show a speedup by a factor of almost four for routing reconfiguration compared to the state-of-the-art approach. Evaluation with transient faults shows that a dedicated reconfiguration unit enables successful reconfiguration of routing tables even in case of high error probabilities.

Introduction

The ongoing technology scaling allows an increasing number of cores to be implemented on a single chip, e.g. Intel’s Xeon Phi Coprocessor [1] or Tilera’s Tile-MX multicore processor [2]. As this scaling trend continues [3], future multiprocessor systems will feature hundreds of cores on a single chip.

The increasing size of on-chip systems poses a new challenge to Networks-on-Chip (NoCs).Mechanisms implemented in an NoC, such as table-based routing, work well for small systems but do not scale for bigger systems. A possibility to cope with scalability problems is the introduction of a hierarchical structure to NoCs. A hierarchical NoC can be obtained by constructing its topology using subnetworks or by segmenting a given topology into logical units. Both subnetworks and logical units enable formerly global mechanisms to be applied locally thus reducing their complexity. Compared to subnetworks, logical units have the advantage that they can be applied without changing an existing topology. Typically, network nodes (switch + core) are grouped into a logical unit if they are part of the same task and share a spatial relation.

The downside of technology scaling is the increased probability of occurrence of permanent faults in an NoC due to manufacturing inaccuracies [4] or wear-out effects such as electromigration [5] that emerge during system operation. The failure of links or switches due to permanent faults results in an altered network topology. In such a case, static routing can no longer maintain connectivity between system components. For this reason, it is crucial that the routing is adapted to the new network situation to enable packets to circumvent faulty components.