مقاله انگلیسی رایگان در مورد شبیه سازی و تجزیه و تحلیل مقایسه ای تجربی توپولوژی های مبدل DC-DC – الزویر 2020

1- Introduction

2- System architecture

3- Modelling of the WECS

4- Performance analysis of proposed DC nanogrid topology

5- Conclusion

References

Abstract

Wind energy conversion system (WECS) based DC nanogrid topology is proposed in this paper. The WECS topology is based on self-excited induction generator (SEIG) which is cost effective, and has rugged construction and combination of diode bridge rectifier (DBR) with DC-DC converter to implement the maximum power point tracking technique. The combination of diode DBR with DC-DC converter allows simple control structure due to one controllable switch as compared to complex control in the conventional controlled/semi-controlled rectifier with six controllable switches. Further, proposed DC nanogrid topology enhances the SEIG efficiency due to the reduction of harmonic injection on machine side from DBR implementation. The detailed harmonic spectrum analysis is carried out by developing the laboratory scale prototype of DBR based SEIG topology for WECS to justify the selection of DBR instead of the controlled rectifier. Further, to analyze the effect of different types DC-DC converter to make combination with the DBR. Afterwards, the dynamic performance of the proposed DC nanogrid topology is analyzed to understand the selection of the DC-DC converter with DBR for different DC grid voltage conditions.

Introduction

Electricity plays a vital role in energy supply, however, the electricity generation is the single largest source of CO2 emission, which is more than 40% of CO2 emission related to global energy. By the year 2030, global electricity demand is likely to double [1,2]. Hence, climate change mitigation and increasing energy demand motivates for the development of renewable energy resources. The renewable energy resources such as solar and wind energy are distributed in nature which favors the electricity generation and consumption on site. With technological advancement and regulatory changes, the concept of supplying the load locally has led to a concept of nanogrid. Thus, the development of renewable based nanogrid are gaining attention in recent past for providing environment-friendly, sustainable and economical electricity [3]. Further, the development of power electronics has transformed the load profile of end user as the modern appliances operate on DC supply [4]. Having this understanding, the concept of DC nanogrid has been proposed in the literature to elude multiple AC-DC conversion and vice-versa [5]. The DC distribution enables easy control, no issue of frequency, power angle, phase sequence, and power factor. Mashood et al.