مقاله انگلیسی رایگان در مورد رویکرد نوسانگر جایگزینی بهبود یافته برای تجزیه و تحلیل اثر متقابل ساختار خاک – الزویر 2018

1- Introduction

2- Soil-structure interaction model

3- Modelling parameters

4- EFSDOF oscillator

5- Response parameters

6- Elastic acceleration response spectrum

7- Constant-ductility strength reduction factor and inelastic displacement ratio

8- Structural and global ductility ratios

9- Discussion

10- Conclusions

References

Abstract

This paper aims to improve the effectiveness of the replacement oscillator approach for soil-structure interaction (SSI) analysis of flexible-base structures on soft soil deposits. The replacement oscillator approach transforms a flexible-base single-degree-of-freedom (SDOF) structure into an equivalent fixed-base SDOF (EFSDOF) oscillator so that response spectra for fixed-base structures can be used directly for SSI systems. A sway-rocking SSI model is used as a baseline for assessment of the performance of EFSDOF oscillators. Both elastic and constant-ductility response spectra are studied under 20 horizontal ground motion records on soft soil profiles. The effects of frequency content of the ground motions and initial damping of the SSI systems are investigated. It is concluded that absolute acceleration spectra, instead of pseudo-acceleration spectra, should be used for EFSDOF oscillators in force-based design of SSI systems. It is also shown that using an EFSDOF oscillator is not appropriate for predicting the constant-ductility spectra when the initial damping ratio of the SSI system exceeds 10%. Based on the results of this study, a correction factor is suggested to improve the accuracy of the replacement oscillator approach for soft soil conditions.

Introduction

The preliminary design of typical building structures in current seismic design codes and provisions is mainly based on elastic spectrum analysis, where the inelastic strength and displacement demands are estimated by using modification factors, such as the constant-ductility strength reduction factor Rμ (i.e. reduction in strength demand due to nonlinear hysteretic behaviour) and inelastic displacement ratio Cμ [1–3]. The spectral shapes of elastic response spectra and modification factors in most seismic design codes and provisions (e.g. [3,4]) are derived by averaging the results of response-history analyses performed on single-degree-of-freedom (SDOF) oscillators using a number of earthquake ground motions [5–7]. In engineering practice, the frequency content of a ground acceleration motion at a soft soil site is often characterized by a predominant period [8] as an influential parameter for estimating the seismic response of buildings. It is well known that spectral accelerations for soft soil sites attain their maximum values at specific periods TP, which correspond to the resonance between the vibration of buildings and the amplification of seismic waves travelling upwards through various soil deposits [9]. However, most current seismic codes adopt design acceleration spectra that are smoothed by the averaging of a number of spectra whose peak ordinates may occur at significantly different values of TP. As a consequence, averaging these dissimilar spectra leads to a flatter spectrum for soft soil profiles than for rock and stiff soil sites, while disregarding the frequency content of the ground motions [7]. Xu and Xie [10] developed the concept of a Bi-Normalized Response Spectrum (BNRS) by normalizing the spectral acceleration Sa and the period of the structure T by the Peak Ground Acceleration (PGA) and the spectral predominant period TP of each ground excitation, respectively. Based on analyses performed using 206 free-field records of the Chi-Chi earthquake (1999), they found that the BNRS curves were practically independent of site class or epicentre distance, and thus represented a good substitute for the code-specified design spectra that are based on simple averaging of spectral values. In a follow-up study, Ziotopoulou and Gazetas [7] demonstrated that BNRS can preserve the resonance between soil deposits and excitations, thereby reflecting more realistically the effects of the frequency content of the ground motion.