مقاله انگلیسی رایگان در مورد تأثیر میرایی بر طول عمر فرسودگی – الزویر ۲۰۱۸

مقاله انگلیسی رایگان در مورد تأثیر میرایی بر طول عمر فرسودگی – الزویر ۲۰۱۸

 

مشخصات مقاله
ترجمه عنوان مقاله تأثیر میرایی مودال بر طول عمر فرسودگی تخمین زده شده
عنوان انگلیسی مقاله Influence of the modal damping on the estimated fatigue life
انتشار مقاله سال ۲۰۱۸
تعداد صفحات مقاله انگلیسی ۱۲ صفحه
هزینه دانلود مقاله انگلیسی رایگان میباشد.
پایگاه داده نشریه الزویر
نوع نگارش مقاله
مقاله پژوهشی (Research Article)
مقاله بیس این مقاله بیس نمیباشد
نوع مقاله ISI
فرمت مقاله انگلیسی  PDF
ایمپکت فاکتور(IF)
۰٫۹۷۰ در سال ۲۰۱۸
شاخص H_index ۵۱ در سال ۲۰۱۹
شاخص SJR ۰٫۲۷۷ در سال ۲۰۱۸
شناسه ISSN ۱۸۷۷-۷۰۵۸
مدل مفهومی ندارد
پرسشنامه ندارد
متغیر ندارد
رفرنس دارد
رشته های مرتبط مهندسی مکانیک، ریاضی
گرایش های مرتبط طراحی جامدات، ساخت و تولید، آنالیز عددی
نوع ارائه مقاله
ژورنال و کنفرانس
مجله / کنفرانس پروسیدیای مهندسی – Procedia Engineering
دانشگاه  HBM Prenscia, 95700 Roissy-en-France, France
کلمات کلیدی فرسودگی، مودال، میرایی، تجزیه و تحلیل عنصر محدود دینامیکی، مقیاس کشش مجازی
کلمات کلیدی انگلیسی fatigue, modal, damping, dynamic FEA, virtual strain gage
شناسه دیجیتال – doi
https://doi.org/10.1016/j.proeng.2018.02.028
کد محصول  E12470
وضعیت ترجمه مقاله  ترجمه آماده این مقاله موجود نمیباشد. میتوانید از طریق دکمه پایین سفارش دهید.
دانلود رایگان مقاله دانلود رایگان مقاله انگلیسی
سفارش ترجمه این مقاله سفارش ترجمه این مقاله

 

فهرست مطالب مقاله:
Abstract

۱٫ Introduction

۲٫ Vibration, Dynamics, and FE simulation

۳٫ Important factors in fatigue analysis

۴٫ Experimental modal analysis

۵٫ Improving Fatigue Analysis through Experimental and CAE Correlation

۶٫ Case study

۷٫ Conclusions

References

 

بخشی از متن مقاله:
Abstract

The durability assessment of a component or structure is often assessed using Finite Element Analysis (FEA)-based structural simulations. Fatigue is a progressive failure mode that is related to the stress cycle’s range in a power law such that the fatigue damage increases exponentially as the stress range increases. When the frequency content of the loading gets closer to the natural frequencies of the structure, resonance effects are activated. In this case, the dynamic properties of the structure must be included in the analysis in order to better account for the increased stress response. A dynamic FEA produces therefore more realistic results compared to a static analysis, but requires knowledge of additional characteristics such as mass and damping. In a dynamic FEA, whether transient or steady state frequency response, the damping property governs indeed the magnitude of the dynamic stress response and hence the durability of the component. Unfortunately a default damping value is sometimes erroneously assumed for all modes leading to errors in the stress response, which in turn leads to significant errors in the fatigue life estimates. The modal parameters – including damping ratios – for the structure’s modes of vibration can be extracted using experimental modal analysis techniques. The purpose of this article is first, to explain the critical role that damping plays in fatigue damage; and second, to recommend best practices for determining modal damping experimentally. A simple example of an automotive component will be used to illustrate the importance of using experimental modal analysis to adjust the properties of a FE-based dynamic structural analysis. An experimental modal test followed by a modal analysis will be described. The mode shapes obtained experimentally and analytically will be compared to validate the mass, stiffness and boundary conditions used in the modelling. Then, it will be shown that using realistic values for the damping ratios will help to obtain stress results that correlate with the measured stress. Finally, this example will illustrate the very high sensitivity of the fatigue life estimate to the damping ratios.

Introduction

Fatigue is a progressive failure mode caused by stress cycles. These stress cycles can be driven by dynamics and resonance under some conditions, so prediction of fatigue life requires an understanding of resonance. FEA is often used for the prediction of product durability and can account for dynamics. However, these analytical stress results need to be correlated to real structural behaviour in order to accurately predict fatigue life. Often a damping ratio is assumed when performing the FE structural analysis. This can lead to errors in the fatigue life estimation. Experimental techniques can be used to properly quantify the damping and therefore improve the accuracy of the durability analysis. This paper recommends best practices for improving FEA-based stress and durability analysis via experimental techniques for determining modal damping and correlating analytical results with the real world.

ثبت دیدگاه