مقاله انگلیسی رایگان در مورد بهبود قابلیت نفوذ منبع حرارتی برای ۳۱۶ جوش فولاد ضد زنگ تولید شده توسط جوشکاری ترکیبی لیزری-MIG – الزویر ۲۰۲۲

مقاله انگلیسی رایگان در مورد بهبود قابلیت نفوذ منبع حرارتی برای ۳۱۶ جوش فولاد ضد زنگ تولید شده توسط جوشکاری ترکیبی لیزری-MIG  – الزویر ۲۰۲۲

 

مشخصات مقاله
ترجمه عنوان مقاله بهبود قابلیت نفوذ منبع حرارتی برای ۳۱۶ جوش فولاد ضد زنگ تولید شده توسط جوشکاری ترکیبی لیزری-MIG با کمک میدان مغناطیسی متناوب
عنوان انگلیسی مقاله Improvement of penetration ability of heat source for 316 stainless steel welds produced by alternating magnetic field assisted laser-MIG hybrid welding
انتشار مقاله سال ۲۰۲۲
تعداد صفحات مقاله انگلیسی ۱۳ صفحه
هزینه دانلود مقاله انگلیسی رایگان میباشد.
پایگاه داده نشریه الزویر
نوع نگارش مقاله
مقاله پژوهشی (Research Article)
مقاله بیس این مقاله بیس نمیباشد
نمایه (index) Scopus – Master Journals List – JCR
نوع مقاله ISI
فرمت مقاله انگلیسی  PDF
ایمپکت فاکتور(IF)
۵٫۵۵۱ در سال ۲۰۲۰
شاخص H_index ۱۹۰ در سال ۲۰۲۰
شاخص SJR ۱٫۷۳۶ در سال ۲۰۲۰
شناسه ISSN ۰۹۲۴-۰۱۳۶
شاخص Quartile (چارک) Q2 در سال ۲۰۲۰
فرضیه ندارد
مدل مفهومی ندارد
پرسشنامه ندارد
متغیر ندارد
رفرنس دارد
رشته های مرتبط جوشکاری
گرایش های مرتبط جوشکاری برق، صنایع فلزی
نوع ارائه مقاله
ژورنال
مجله  مجله فناوری پردازش مواد – Journal of Materials Processing Tech
کلمات کلیدی قابلیت نفوذ، میدان مغناطیسی متناوب، جوشکاری ترکیبی Laser-MIG ، پلاسمای جوشکاری، انتقال قطرات، رفتار سوراخ کلید
کلمات کلیدی انگلیسی Penetration ability – Alternating magnetic field – Laser-MIG hybrid welding – Welding plasmas – Droplet transition – Keyhole behavior
شناسه دیجیتال – doi
https://doi.org/10.1016/j.jmatprotec.2021.117329
کد محصول E15640
وضعیت ترجمه مقاله  ترجمه آماده این مقاله موجود نمیباشد. میتوانید از طریق دکمه پایین سفارش دهید.
دانلود رایگان مقاله دانلود رایگان مقاله انگلیسی
سفارش ترجمه این مقاله سفارش ترجمه این مقاله

 

فهرست مطالب مقاله:
Abstract
Keywords
Introduction
Experimental procedure
Results and discussion
Conclusions
Author statement
Declaration of Competing Interest
Acknowledgments
References

بخشی از متن مقاله:
ABSTRACT
An alternating magnetic field was designed to increase weld depth of laser-MIG hybrid welded 316 stainless steel joint. The influencing mechanism of alternating magnetic field on improving penetration ability of hybrid heat source of laser-MIG hybrid welding was revealed. The results suggested that the difference of weld depth under different magnetic flux density was attributed to the change of characteristics of arc plasma and laser-induced plasma, droplet transition and keyhole behavior. More compressed arc shape under lower magnetic flux density (LMFD) with 20 m T and 30 m T promoted laser-induced plasma to move along the channel of laser beam, leading to decrease of weld depth. However, the laser-induced plasmas could be dispersed away from the channel of laser beam under higher magnetic flux density (HMFD) of 60 m T and 90 m T, which was the main reason for the increased penetration ability of hybrid heat source. Besides, the droplet transferred to behind the keyhole instead of dropping into the keyhole and more stable keyhole was obtained under HMFD, which were also beneficial for deeper penetration depth of laser energy. Moreover, the motion behavior of charged particles of arc plasma and laser-induced plasma and forces condition of droplet transition were discussed in magnetic field assisted laser-MIG hybrid welding.

ثبت دیدگاه