مقاله انگلیسی رایگان در مورد حالت شکست در هیدرولیک منطقه ای برای ماشین آلات ساختمانی – IEEE 2018

 

مشخصات مقاله
انتشار مقاله سال 2018
تعداد صفحات مقاله انگلیسی 4 صفحه
هزینه دانلود مقاله انگلیسی رایگان میباشد.
منتشر شده در نشریه IEEE
نوع مقاله ISI
عنوان انگلیسی مقاله Modes of Failure in Zonal Hydraulics for Construction Machinery
ترجمه عنوان مقاله حالت های شکست در هیدرولیک های منطقه ای برای ماشین آلات ساختمانی
فرمت مقاله انگلیسی  PDF
رشته های مرتبط مهندسی مکانیک
گرایش های مرتبط مکانیک سیالات
مجله کنفرانس پژوهشگران جوان روسی در مهندسی برق و الکترونیک – Conference of Russian Young Researchers in Electrical and Electronic Engineering
دانشگاه Department of Mechanical Engineering – Aalto University – Finland
کلمات کلیدی حالت های شکست؛ فعال کننده الکترو هیدرواستاتیک؛ هیدرولیک زونال؛ ماشین آلات ساختمانی
کلمات کلیدی انگلیسی failure modes; electro-hydrostatic actuators; zonal hydraulics; construction machinery
کد محصول E7664
وضعیت ترجمه مقاله  ترجمه آماده این مقاله موجود نمیباشد. میتوانید از طریق دکمه پایین سفارش دهید.
دانلود رایگان مقاله دانلود رایگان مقاله انگلیسی
سفارش ترجمه این مقاله سفارش ترجمه این مقاله

 

بخشی از متن مقاله:
I. INTRODUCTION

Hydraulics is a traditional application science widely used in industrial, aeronautical, and off-road mobile applications due to its superior power density and mature technology. Construction machinery examples are illustrated in Figure 1. Recently, hydraulic technology has mainly developed incrementally. However, the field of construction machinery will benefit from a new architecture with improved efficiency and high performance level during lifetime; in order to achieve this, built-in functionalities, such as fault tolerance and predictive maintenance are required. Fault tolerance is a demanding topic in case of off-road and construction machinery. According to [1], 15 % of failures are concentrated in sensors and 10 % in valves, as there are no 100 % fault-tolerant commercial valves in case of off-road machinery. In [2], the failure rate in hydraulic circuits was studied with four different mobile working machines during three years. The authors in [2] found that the hydraulic valves failed 69 times, pumps 34 times, hydraulic motors 237 times, cylinders 318 times and hoses 90 times in 106 hours. Failures were caused by contamination, wearing, external damages, material error, maintenance error or excess load. The off -road machine cases are not so critical compared to airspace, oceanic and other extreme applications, however, faults still create unpleasant financial losses and significant time delays in manufacturing or other performing tasks. Therefore, valves and sensors are critical components in conventional systems, independent from the type of application. Many applications can benefit from valveless systems, such as pump-controlled systems with “smart” use of electric drive. Therefore, failure modes of zonal hydraulics systems are investigated by means of review of the current literature. First, this paper introduces zonal hydraulic concepts in detail, demonstrates examples of pump-controlled systems, highlighting the effects of the components. Secondly, the review was designed to cover hydraulic and electric system components. As a result, conclusions are drawn considering designed pump-controlled systems and their benefits for the construction machinery.

دیدگاهتان را بنویسید

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *

دکمه بازگشت به بالا