مشخصات مقاله | |
انتشار | مقاله سال 2018 |
تعداد صفحات مقاله انگلیسی | 37 صفحه |
هزینه | دانلود مقاله انگلیسی رایگان میباشد. |
منتشر شده در | نشریه الزویر |
نوع مقاله | ISI |
عنوان انگلیسی مقاله | Comparison of multiple linear regression and group method of data handling models for 2 predicting sunset yellow dye removal onto activated carbon from oak tree wood |
ترجمه عنوان مقاله | مقایسه رگرسیون خطی چندگانه و روش گروهی مدل های رسیدگی به اطلاعات برای پیش بینی رنگ زرد حذف شده غروب آفتاب در کربن فعال به دست آمده از چوب درخت بلوط |
فرمت مقاله انگلیسی | |
رشته های مرتبط | شیمی، آمار |
گرایش های مرتبط | شیمی محیط زیست، آمار ریاضی |
مجله | فناوری محیط زیست و نوآوری – Environmental Technology & Innovation |
دانشگاه | Department of Chemistry – Islamic Azad University – Iran |
کلمات کلیدی | جذب، رنگ آنیونی SY، سینتیک جذب، ایزوترم، مدل سازی |
کلمات کلیدی انگلیسی | Adsorption, anionic dye SY, Adsorption kinetics, Isotherms, Modelling |
شناسه دیجیتال – doi | https://doi.org/10.1016/j.eti.2018.06.006 |
کد محصول | E8194 |
وضعیت ترجمه مقاله | ترجمه آماده این مقاله موجود نمیباشد. میتوانید از طریق دکمه پایین سفارش دهید. |
دانلود رایگان مقاله | دانلود رایگان مقاله انگلیسی |
سفارش ترجمه این مقاله | سفارش ترجمه این مقاله |
بخشی از متن مقاله: |
1. Introduction
Groundwater and surface water has been exploited due to several noxious impurities and among all chemical dyes is one of the most detrimental impurity that possess serious environmental side effect on human being and marine life (Garg et al., 2003;Tanzifi et al., 2018; Yao et al., 2018 Gupta et al., 2011b; Gupta et al., 2013a). Synthetic dyes and pigments are widely utilized as colorants in different industrial processes including the pharmaceutical, textile, leather, paper, gasoline, food industries etc. and a huge amount of unused synthetic dyes is being 8 released in water streams by various industries worldwide annually. Dyes being colored in nature is visible even at very low concentration and it resistive nature also decreases the sunlight penetration in water. Therefore, their release into the environment presents a major source of contamination (Gupta et al., 2013b; Gupta et al., 2014; Tian et al., 2018). Dyes molecules are normally produced from the aromatic structure and their degradation products are toxic or even carcinogenic and mutagenic. In addition to this, it lead to increased biological oxygen demand (BOD) and chemical oxygen demand (COD) levels of aquatic resources (Crini, 2006; Nekouei et al., 2017). Thus, it is the need of today to eliminate the toxic dyes from effluents of industries, before it is released into the environment. Several technologies for instance flocculation–coagulation (Szygula et al., 2009; Wang et al., 2012), photodegradation (Gupta et al., 2011c; Smirnova et al., 2015; Tadjarodi et al., 2013), biodegradation (Li et al., 2004), membrane separation(Bouazizi et al., 2017; Chen et al., 2017; 20 Ruan et al., 2016; Saravan et al., 2013; 2015; Tahri et al., 2016), aerobic or anaerobic treatment (Fernando et al., 2013), electrochemical (Aquino et al., 2010; Riera-Torres and Gutiérrez, 2010), and oxidizing agents (Ghoneim et al., 2011) have been used worldwide for the removal of noxious dyes from wastewater. In spite of the growth of different techniques for treatment of dyeeffluent, but still there are some specific challenges, for example effective, rapid and economic 2 for treatment of water and wastewater at a commercial level are going on. Among these methods for water treatments, the adsorption technique by solid adsorbents is one of the most efficient approaches for the uptake of dyes from industrial wastewater (Gupta et al., 2011a). The key advantage of this technology is that it is scalable and large volume of effluents can be passed in a single run, which lead to high quality of treated wastewaters without the formation of harmful materials (Gupta et al., 2010b). |