مقاله انگلیسی رایگان در مورد فرایند، صنایع نفت و گاز – الزویر ۲۰۲۰

مقاله انگلیسی رایگان در مورد فرایند، صنایع نفت و گاز – الزویر ۲۰۲۰

 

مشخصات مقاله
ترجمه عنوان مقاله فصل ۸ – اسناد رده دوم – فرایند، صنایع نفت و گاز
عنوان انگلیسی مقاله Chapter 8 – Second Tier Documents—Process, Oil and Gas Industries
انتشار مقاله سال ۲۰۲۰
تعداد صفحات مقاله انگلیسی ۲۴ صفحه
هزینه دانلود مقاله انگلیسی رایگان میباشد.
پایگاه داده نشریه الزویر
نوع نگارش مقاله
مقاله فصلی (Chapter Item)
مقاله بیس این مقاله بیس نمیباشد
نوع مقاله ISI
فرمت مقاله انگلیسی  PDF
مدل مفهومی ندارد
پرسشنامه ندارد
متغیر ندارد
رفرنس دارد
رشته های مرتبط مهندسی نفت، مهندسی شیمی
نوع ارائه مقاله
ژورنال
مجله  کتاب راهنمای سیستم های بحرانی ایمنی – The Safety Critical Systems Handbook
کلمات کلیدی مشخصات؛ سطح یکپارچگی ایمنی؛ استاد رده دوم؛ سیستم های ابزاری ایمنی؛ ضروریات؛ چرخه عمر؛ راهنمایی
کلمات کلیدی انگلیسی Guidance؛ Life cycle؛ Requirements؛ Safety instrumented systems؛ Safety integrity level، Sector tier documents؛ Specifications
شناسه دیجیتال – doi
https://doi.org/10.1016/B978-0-12-820258-6.00008-5
کد محصول E15046
وضعیت ترجمه مقاله  ترجمه آماده این مقاله موجود نمیباشد. میتوانید از طریق دکمه پایین سفارش دهید.
دانلود رایگان مقاله دانلود رایگان مقاله انگلیسی
سفارش ترجمه این مقاله سفارش ترجمه این مقاله

 

فهرست مطالب مقاله:
Abstract

Keywords

۸٫۱٫ IEC International Standard 61511: Functional Safety—Safety Instrumented Systems for the Process Industry Sector (Second Edition was published in 2016)

  • ۸٫۱٫۱٫ Organizing and Managing the Life Cycle
  • ۸٫۱٫۲٫ Requirements Involving the Specification
  • ۸٫۱٫۳٫ Requirements for Design and Development
    • (a). Selection of components and subsystems
    • (b). Architecture (i.e., safe failure fraction)
    • (c). Predict the random hardware failures
    • (d). Software (referred to as “program”)
  • ۸٫۱٫۴٫ Integration and Test (Part of the Verification Process)
  • ۸٫۱٫۵٫ Validation (Meaning Overall Acceptance Test and Close Out of Actions)
  • ۸٫۱٫۶٫ Modifications
  • ۸٫۱٫۷٫ Installation and Commissioning
  • ۸٫۱٫۸٫ Operations and Maintenance
  • ۸٫۱٫۹٫ Conformance Demonstration Template
  • ۸٫۱٫۱۰٫ Prior Use
  1. ۸٫۲٫ Institution of Gas Engineers and Managers IGEM/SR/15: Programmable Equipment in Safety-Related Applications—۵th Edition 2010
  2. ۸٫۳٫ Guide to the Application of IEC 61511 to Safety Instrumented Systems in the UK Process Industries
  3. ۸٫۴٫ ANSI/ISA-84.00.01 (2004)—Functional Safety, Instrumented Systems for the Process Sector
  4. ۸٫۵٫ Recommended Guidelines for the Application of IEC 61508 and IEC 61511 in the Petroleum Activities on the Norwegian Continental Shelf OLF-070—Rev 2, 2004
  5. ۸٫۶٫ Energy Institute: Guidance on Safety Integrity Level

بخشی از متن مقاله:

Abstract

This chapter addresses the contents of the IEC 61511 in detail. Each Part from one to three is briefly covered. Some of the following documents are referred to as “second tier” guidance in relation to IEC 61508. Due to the open ended nature of the statements made, and to ambiguity of interpretation, it cannot be said that conformance with any one of them automatically infers compliance with IEC 61508. However, they cover much the same ground as each other albeit using slightly different terms to describe documents and life-cycle activities. IEC 61511 is intended as the process industry sector implementation of IEC 61508.

۸٫۱ IEC International Standard 61511: Functional Safety Instrumented Systems for the Process Industry Sector (Second Edition was published in 2016)

IEC 61511 is intended as the process industry sector implementation of IEC 61508.

It gives application specific guidance on the use of standard products for the use in “safety instrumented” systems using the proven-in-use justification. The guidance allows the use of field devices to be selected based on proven in use for application up to SIL 3 and for standard off-the-shelf PLCs for applications up to SIL 2.

The first edition was issued at the beginning of 2003. Edition 2 was published during 2016 and this chapter has been updatedtoincludethe main changes from edition 1. Unfortunately part 1 which was published in February 2016 contained many editorial mistakes. Some of these editorial mistakes may lead the reader to misinterpret the technical requirements.

ثبت دیدگاه