مقاله انگلیسی رایگان در مورد فرمول های ساده شده برای ظرفیت تحمل لرزه ای فونداسیون نواری کم عمق – الزویر ۲۰۱۸

elsevier

 

مشخصات مقاله
ترجمه عنوان مقاله فرمول های ساده شده برای ظرفیت تحمل لرزه ای فونداسیون نواری کم عمق
عنوان انگلیسی مقاله Simplified formulas for the seismic bearing capacity of shallow strip foundations
انتشار مقاله سال ۲۰۱۸
تعداد صفحات مقاله انگلیسی ۱۱ صفحه
هزینه دانلود مقاله انگلیسی رایگان میباشد.
پایگاه داده نشریه الزویر
نوع نگارش مقاله
مقاله کوتاه (Short Communication)
مقاله بیس این مقاله بیس نمیباشد
نمایه (index) Scopus – Master Journal List – JCR
نوع مقاله ISI
فرمت مقاله انگلیسی  PDF
ایمپکت فاکتور(IF)
۲٫۹۸۹ در سال ۲۰۱۸
شاخص H_index ۷۸ در سال ۲۰۱۹
شاخص SJR ۱٫۳۵۹ در سال ۲۰۱۸
شناسه ISSN ۰۲۶۷-۷۲۶۱
شاخص Quartile (چارک) Q1 در سال ۲۰۱۸
رشته های مرتبط مهندسی عمران
گرایش های مرتبط زلزله، خاک و پی، مدیریت ساخت، سازه
نوع ارائه مقاله
ژورنال
مجله دینامیک خاک و مهندسی زلزله – Soil Dynamics and Earthquake Engineering
دانشگاه Università Niccolò Cusano, Via Don Carlo Gnocchi, 3 – 00166 Roma, Italy
کلمات کلیدی ظرفیت تحمل، فونداسیون نواری کم عمق، زمین لرزه، تحلیل حدی، قضیه حد فوقانی
کلمات کلیدی انگلیسی Bearing capacity، Shallow Strip foundations، Earthquakes، Limit analysis، Upper bound theorem
شناسه دیجیتال – doi
https://doi.org/10.1016/j.soildyn.2017.09.027
کد محصول E11278
وضعیت ترجمه مقاله  ترجمه آماده این مقاله موجود نمیباشد. میتوانید از طریق دکمه پایین سفارش دهید.
دانلود رایگان مقاله دانلود رایگان مقاله انگلیسی
سفارش ترجمه این مقاله سفارش ترجمه این مقاله

 

فهرست مطالب مقاله:
Abstract

۱- Introduction

۲- Problem definition and theoretical framework

۳- Cohesive-frictional soil (γ ≠ ۰, c ≠ ۰, ϕ ≠ ۰)

۴- Purely cohesive soil (γ ≠ ۰, c = cu, ϕ = ۰)

۵- Summary of results and ultimate failure envelopes

۶- Conclusions

References

بخشی از متن مقاله:

Abstract

The seismic bearing capacity of shallow foundations is affected by inertia forces acting both on the structure and in the supporting soil. Even though the former have been recognised to play often the major role, by increasing the horizontal load and the overturning moment transferred to the foundation, both of them must be taken into account in the seismic design of foundations. Using a pseudostatic approach and based on the upper bound theorem of limit analysis, a comprehensive set of formulas is derived for the computation of the seismic bearing capacity of strip footings resting on cohesive-frictional and purely cohesive soils. Results are given in terms of: (i) reduction coefficients for the Terzaghi’s equation of the vertical bearing capacity and (ii) ultimate failure envelopes in the space of normalised loading variables. These formulas extend to more general conditions other literature results, allowing to take into account easily the effects of inertia forces acting both on the superstructure (load inclination and eccentricity) and into the foundation soil. The reliability of the proposed equations, suitable for the design practice, is verified through a thorough comparison with other rigorous and approximate solutions.

Introduction

Many studies on the seismic bearing capacity of shallow foundations have shown that inertia forces acting on the structure and in the supporting soil tend to reduce the bearing capacity under seismic conditions. Most works on this topic have been carried out with a pseudostatic approach [18,22,23,25,3,29,30,32,34,35,5,6,9], by adopting: (i) different methods (numerical or theoretical) and theories (limit equilibrium, limit analysis or method of characteristics); (ii) different constitutive assumptions for the soil (purely frictional, purely cohesive or cohesive-frictional); (iii) different hypotheses on the inertia forces on the soil (with or without the vertical component) and (iv) on the structure (equal to or a fraction of those acting on the soil). Despite the fact that structure inertia has been recognised to play often the major role in reducing the seismic bearing capacity of shallow foundations, recent studies have highlighted possible situations in which even the effects associated to soil inertia can have a significant relevance, in the case of either frictional [22,6] or purely cohesive [24] soils. Moreover, most design codes recommend to take into account the effects of soil inertia in the seismic design of such systems (e.g.: [10]). Going to the design practice, the bearing capacity of shallow foundations under general loading is usually evaluated by means of simple approaches, neglecting any possible soil-structure interaction effect. In this context, codes and guidelines make use of closed form expressions for the bearing capacity, given in the form of either the classical Terzaghi’s formula [1,17] or complete three-dimensional failure envelopes [10]. With this respect, only few works in the literature provide empirical formulas including inertia forces both on the structure and into the soil. As far as spread footings on cohesive-frictional soils are concerned, Budhu and Al-Karni [3], Paolucci & Pecker [23] and Cascone et al. [5] provide reduction factors for the vertical bearing capacity. However, Budhu and Al-Karni [3] consider the same accelerations into the soil and the structure; Paolucci & Pecker [23] do not contemplate the effects of the structure inertia on the Nc and Nq bearing capacity factors, while Cascone et al. [5] refer only to the effects of the seismic action on the Nγ term, thus resulting in a limited applicability of the proposed formulas. Only very recently, Cascone & Casablanca [6] proposed empirical expressions for the reduction coefficients, derived from the best fit of numerical results.

ارسال دیدگاه

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *